Irwin Tools 3019009B 9/64-Inch Black and Gold HSS 135-Degree Jobber Length, Pack of 12

#ad
#ad
IRWIN 3019009B #ad - Constructed of m-2 high speed steel for the best combination of strength, heat resistance and wear resistance, this bit will get the job done quickly. The 135 degree split point ensures a true start and eliminates bit walking. High speed steel features a black shank and gold flute with Heavy-duty web construction for strength and durability.

The 135 degree split point ensures a true start and eliminates bit walking. For use in wood, metal and plastic. The irwin tools 3019009b 9/64-inch black & gold hss 135-degree - jobber Length, Bulk - Pack of 12 is ideal for basic drilling applications in metal, wood and plastic.

More information about IRWIN 3019009B #ad

10 Pcs Pack 1/8" Inch M35 HSS Cobalt Drill Bit Jobber Length Drill Bits Twist Drill Bits 135 Deg. Split Point Drilling Steel, Meteal, Iron.

#ad
#ad
MAX-CRAFT MPCO0108 #ad - M35 cobalt high speed steel for Drilling Steel, Stainless Steel, Hard Metal and Iron. Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel. 1/8" inch-hss cobalt drill bit, 5% cobalt for higher heat & abrasion resistance, cast iron & stainless steel, including heavy duty abrasive, alloy metal Drilling On Hardened Steel, Jobber Length, Heavy Duty Web Construction For Strength & Durability, 135 Degree Split Point To Minimize Walk, For Tough Metal Drilling, Packed in plastic bag with lable 1/8 inch hss cobalt co5% fully Ground Jobber Length Twist Drills General Purpose.

. 135-degree split-point tip starts drilling immediately with less force and eliminates "walking" across the work surface. 10pcs packed in a plastic Bag For Easy Usage And Store.

More information about MAX-CRAFT MPCO0108 #ad


Similar products



IRWIN Tools 63112ZR 3/16-Inch Cobalt 135-Degree Jobber Length Drill Bit, Pack of 12

#ad
#ad
IRWIN 63112ZR #ad - 135-degree split-point tip starts drilling immediately with less force and eliminates "walking" across the work surface. Straight shank works in both keyed and key-less drill chucks. The cobalt steel helps discipate heat, which is the killer of all drill bits, providing it with longer life and more durability.

Heavy duty spiral flute design produces faster chip ejection. The cobalt construction allows this bit to drill abrasive materials like Stainless Steel and Cast Iron which are extremely tough on traditional high speed steel drill bits. Jobber drill bits feature 135-Degree Split Point Tips for reduced bit walking.

IRWIN Tools 63112ZR 3/16-Inch Cobalt 135-Degree Jobber Length Drill Bit, Pack of 12 #ad - M35 cobalt high speed steel for Drilling Steel, Stainless Steel, Hard Metal and Iron. Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel. The irwin tools 63112zr 3/16-inch cobalt 135-degree-jobber Length-Bulk - Pack of 12 is made of M35 Cobalt Steel. Shorter cutting lips reduce torque for drilling in high tensile strength materials.

The bit has a 135-degree split point tip to help eliminate walking as you start to drill the hole in metal. 1/8 inch hss cobalt co5% fully Ground Jobber Length Twist Drills General Purpose. 10pcs packed in a plastic Bag For Easy Usage And Store.

More information about IRWIN 63112ZR #ad


Similar products



IRWIN Tools 63108 1/8-Inch Cobalt 135-Degree Jobber Length Drill Bit, Pack of 12

#ad
#ad
IRWIN 63108 #ad - The straight shank works in both keyed and key-less chucks. The bit has a 135-degree split point tip to help eliminate walking as you start to drill the hole in metal. Straight shank works in both keyed and key-less drill chucks. 135-degree split-point tip starts drilling immediately with less force and eliminates "walking" across the work surface.

The cobalt construction allows this bit to drill abrasive materials like Stainless Steel and Cast Iron which are extremely tough on traditional high speed steel drill bits. The cobalt steel helps discipate heat, which is the killer of all drill bits, providing it with longer life and more durability. M-35 cobalt construction for Durability in abrasive materials.

IRWIN Tools 63108 1/8-Inch Cobalt 135-Degree Jobber Length Drill Bit, Pack of 12 #ad - The irwin tools 63108 1/8-inch cobalt 135-degree-jobber Length-Bulk - Pack of 12 is made of M35 Cobalt Steel. 10pcs packed in a plastic Bag For Easy Usage And Store. M-35 cobalt construction for Durability in abrasive materials. Jobber drill bits feature 135-Degree Split Point Tips for reduced bit walking. Shorter cutting lips reduce torque for drilling in high tensile strength materials.

Jobber drill bits feature 135-Degree Split Point Tips for reduced bit walking. Shorter cutting lips reduce torque for drilling in high tensile strength materials.

More information about IRWIN 63108 #ad


Similar products



Irwin Tools 63109 9/64-Inch Cobalt 135-Degree Jobber Length, Pack of 12

#ad
#ad
IRWIN 63109 #ad - M-35 cobalt construction for Durability in abrasive materials. 10pcs packed in a plastic Bag For Easy Usage And Store. M-35 cobalt construction for Durability in abrasive materials. 135-degree split Point Tip for reduced bit walking. The cobalt steel helps discipate heat, which is the killer of all drill bits, providing it with longer life and more durability.

M-35 cobalt construction for Durability in abrasive materials. Jobber drill bits feature 135-Degree Split Point Tips for reduced bit walking. The straight shank works in both keyed and key-less chucks. 1/8 inch hss cobalt co5% fully Ground Jobber Length Twist Drills General Purpose. M35 cobalt high speed steel for Drilling Steel, Stainless Steel, Hard Metal and Iron.

Irwin Tools 63109 9/64-Inch Cobalt 135-Degree Jobber Length, Pack of 12 #ad - Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel. Heavy duty spiral flute design produces faster chip ejection. Shorter cutting lips reduce torque for drilling in high tensile strength materials. Straight shank works in both keyed and key-less drill chucks.

Straight shank works in both keyed and key-less drill chucks. Heavy duty spiral flute design produces faster chip ejection.

More information about IRWIN 63109 #ad


Similar products



Migiwata 9/64 Inch Fractional Size M35 Cobalt Steel Extremely Heat Resistant Jobber Length Twist Drill Bit Set of 10pcs with Straight Shank for Repeated Drilling Projects in Stainless Steel and Iron

#ad
#ad
Migiwata #ad - 100% refund. 135-degree split-point tip starts drilling immediately with less force and eliminates "walking" across the work surface. Manufactured from m35 grade cobalt steel, measuring rockwell hardness up to 67, with molybdenum and cobalt added to creates a hardened alloy, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.

No center punch is needed-the 135° quick-Cut points are self-centering and penetrate quickly with less pressure. 10pcs packed in a plastic Bag For Easy Usage And Store. M-35 cobalt construction for Durability in abrasive materials. Technical details: material: m35 cobalt steel angle point: 135 degree flute type: spiral hardness: rockwell 67 shank type: straight shank WHAT'S INCLUDED: 9/64" Cobalt Steel Drill Bit x 10pcs Plastic Case x 1pc BUY WITH CONFIDENCE: Within 90 days, if you're not completely satisfied with the product quality, please contact us.

Migiwata 9/64 Inch Fractional Size M35 Cobalt Steel Extremely Heat Resistant Jobber Length Twist Drill Bit Set of 10pcs with Straight Shank for Repeated Drilling Projects in Stainless Steel and Iron #ad - 135-degree split Point Tip for reduced bit walking. With an extended tool life, Migiwata cobalt drill bits will give you the lowest cost per hole drilled. Heavy duty spiral flute design produces faster chip ejection. Jobber drill bits feature 135-Degree Split Point Tips for reduced bit walking. M-35 cobalt construction for Durability in abrasive materials.

Straight shank works in both keyed and key-less drill chucks.

More information about Migiwata #ad


Similar products



DrillForce 10pcs 9/64 inch x 2-7/8 inch Cobalt Drill Bits, High Speed Steel Twist Drill Bits, Jobber Length, Round Shank. Can drill Stainless Steel, Ideal for DIY, home, general building and engineeri

#ad
#ad
DRILLFORCE #ad - M35 cobalt high speed steel for Drilling Steel, Stainless Steel, Hard Metal and Iron. Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel. Straight shank works in both keyed and key-less drill chucks. 1/8 inch hss cobalt co5% fully Ground Jobber Length Twist Drills General Purpose.

Will not "walk" or "wander". 135-degree split-point tip starts drilling immediately with less force and eliminates "walking" across the work surface. Extremely heat resistant; must be used and operated at 1500 RPM or greater for maximum efficiency. Shorter cutting lips reduce torque for drilling in high tensile strength materials.

DrillForce 10pcs 9/64 inch x 2-7/8 inch Cobalt Drill Bits, High Speed Steel Twist Drill Bits, Jobber Length, Round Shank. Can drill Stainless Steel, Ideal for DIY, home, general building and engineeri #ad - The set includes 10pcs of 9/64" diameter M35 grade cobalt steel twist drill bits. Jobber drill bits feature 135-Degree Split Point Tips for reduced bit walking. Hardness: 65-66 Rockwell. Say bye to all those chips and particles, and leaves a clean, with the twist design the drill bit can quickly clears them out, smooth hole.

Not for use On Concrete, Masonry. Angle point: 135 Degree. Please allow 1-2mm in size measurement chart for variance due to manual measurement. Material: 5% cobalt M35 High Speed Steel.

More information about DRILLFORCE #ad


Similar products



Pack of 12, 1/8-Inch Titanium Nitride Coated Drill Bit, High Speed Steel, Jobber Length, for Metal, Plastic, Wood

#ad
#ad
DrillHulk Ltd DHTI25 #ad - Straight shank works in both keyed and key-less drill chucks. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. Titanium-coated drill bits are designed for general purpose use - drilling through medium and softer materials, such as: Metal, PVC, Wood.

Application: offer best durability and speed for repetitive drilling in medium and softer materials, soft metal, PVC and wood. Titanium coated drill bits with case Notice: For high-speed drilling through metal, lubricate the bit with lightweight oil. Straight shank works in both keyed and key-less drill chucks.

Made in china   you will Get: 12 pieces of 1/8-Inch. M-35 cobalt construction for Durability in abrasive materials. Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Cobalt drill bits: classic 5% cobalt M35 High Speed Steel construction with Titanium Coating for proven capability and durability.

Pack of 12, 1/8-Inch Titanium Nitride Coated Drill Bit, High Speed Steel, Jobber Length, for Metal, Plastic, Wood #ad - Hardness: 5% cobalt drill bits' Rock wall Hardness Level HRC 65-66. Package & size: 10 pieces drill bits in a plastic bag, Diameter 9/64 inch, Total length 2-7/8 inch, Working length 1-3/4 inch. Professional & diy use: for use on metal, wood & plastics, Stainless Steel, Not For Use On Concrete / Masonry.

More information about DrillHulk Ltd DHTI25 #ad


Similar products



1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

#ad
#ad
DrillHulk Ltd DHCO25 #ad - M-35 cobalt construction for Durability in abrasive materials. 135-degree split Point Tip for reduced bit walking. Application: offer best durability and speed for repetitive drilling in medium and softer materials, soft metal, PVC and wood. 10pcs packed in a plastic Bag For Easy Usage And Store. M-35 cobalt construction for Durability in abrasive materials.

Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Titanium nitride coating: add lubricity and hardness, enhancing chip flow, finish hole quality and drill life. Can be repeatedly sharpened as needed: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.

1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12 #ad - Heavy duty spiral flute design produces faster chip ejection. Heavy duty spiral flute design produces faster chip ejection. Include: 12 pieces of 1/8-Inch titanium coated drill bits with case. Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too.

Cobalt drill bits: classic 5% cobalt M35 High Speed Steel construction with Titanium Coating for proven capability and durability. Hardness: 5% cobalt drill bits' Rock wall Hardness Level HRC 65-66. Package & size: 10 pieces drill bits in a plastic bag, Diameter 9/64 inch, Total length 2-7/8 inch, Working length 1-3/4 inch.

More information about DrillHulk Ltd DHCO25 #ad


Similar products



Irwin Tools 73104 1/16-Inch Turbomax Jobber Length, 12-Pack

#ad
#ad
IRWIN 73104 #ad - Application: best used for drilling in hard metal, including stainless steel. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. 10pcs packed in a plastic Bag For Easy Usage And Store. M-35 cobalt construction for Durability in abrasive materials.

M35 cobalt high speed steel for Drilling Steel, Stainless Steel, Hard Metal and Iron. Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel. Three flatted shank on 3/16" and above for better chuck grip 1/8 inch hss cobalt co5% fully Ground Jobber Length Twist Drills General Purpose.

Irwin Tools 73104 1/16-Inch Turbomax Jobber Length, 12-Pack #ad - M-35 cobalt construction for Durability in abrasive materials. Will not "walk" or "wander". 135-degree split Point Tip for reduced bit walking. Include: 12 pieces of 1/8-Inch cobalt drill bits with case. Perfect match for workshop or service vehicles. 135 tip & twist design: increases cutting speed with self-centering and prevents walking, clears chips and particles faster.

Jobber length: 1/8-inch cutting diameter, 1-5/8-Inch flute length, 2-3/4-Inch overall length, 135 degree split point, straight shank. Made from premium high-speed steel: peform better because of its well-balanced toughness.

More information about IRWIN 73104 #ad


Similar products



Bosch ITPH2215 15 Pc. Impact Tough 2 In. Phillips #2 Power Bits

#ad
#ad
Bosch ITPH2215 #ad - Extremely heat resistant; must be used and operated at 1500 RPM or greater for maximum efficiency. Can be repeatedly sharpened as needed: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.

. Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Cobalt drill bits: classic 5% cobalt M35 High Speed Steel construction with Titanium Coating for proven capability and durability. Hardness: 5% cobalt drill bits' Rock wall Hardness Level HRC 65-66.

Bosch ITPH2215 15 Pc. Impact Tough 2 In. Phillips #2 Power Bits #ad - Package & size: 10 pieces drill bits in a plastic bag, Total length 2-7/8 inch, Diameter 9/64 inch, Working length 1-3/4 inch. Professional & diy use: for use on metal, Stainless Steel, wood & plastics, Not For Use On Concrete / Masonry. Shorter cutting lips reduce torque for drilling in high tensile strength materials.

With an xtended torsion zone, precision engineering and heat-treated manufacturing process, these bits deliver tough torque and power for longer – and with less cam out. Perfect match for workshop or service vehicles. 135 tip & twist design: increases cutting speed with self-centering and prevents walking, clears chips and particles faster.

Jobber length: 1/8-inch cutting diameter, 2-3/4-Inch overall length, 135 degree split point, 1-5/8-Inch flute length, straight shank.

More information about Bosch ITPH2215 #ad


Similar products