Top 10 Weldless Bulkhead Fitting 1 – Beer Brewing Pots & Kettles

As an Amazon Associate I earn from qualifying purchases.

1. semfeil brew

#ad

Bulkhead Compression Fitting 1.5” Tri Clamp Weldless Bulkehad 304 Stainless Steel Homebrew Kettle Bulkhead

#adsemfeil brew #ad - 304 stainless construction and High heat compatible silicone gaskets. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Weldless design ideal for FTSs and Brew Bucket flat lid pressurized transfers. Add a 1. 5" tc flange to virtually any vessel!Just drill a 41MM hole and tighen the locknut with 1pcs extra Food grade gasket. The front of the flange does not have flats for a wrench. Works on kettle as small as 12" in diameter. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.

Brand

semfeil brew #ad

2. MINIBREW

#ad

MiniBrew 1" NPT EZ Seal Weldless Bulkhead with EPDM Gaskets for Homebrewing 1 Pack

#adMINIBREW #ad - Stainless steel bulkheads are strong and damage resistant giving you a superior choice compared to other brass-based options which can rust or corrode. Inner and outer threads on our bulk head allow multiple attachment options. Offers extensive selection patent pending: we offer one of the most extensive selection of fittings and gasket grades in the industry.

Patent pending. Variety: not only does the bulk head come in multiple sizes to fit any accessory you might have but we also have the option for food grade quality or industrial strength EPDM quality gaskets. Available in diameters from 1/2” to 1”, every fitting is produced to exact specifications. The left-hand thread will not allow it to loosen even with that pressure. This is because pressure from liquid, on the inside of the fermenter tank or liquid containment system would otherwise over time loosen the nut if it were just a standard thread.

Multi-functional & long lasting: product is made with ss304 industry standard steel. In addition, all of our SS304 seals have been tested. Gaskets come in Food Grade and EPDM options. The outer threads on the bulkheads are reversed, so they tighten backwards. Easy to install: a weldless option to add threads to any tank in seconds but you can also easily remove them to clean your equipment hassle free.

Brand	MINIBREW #ad
Manufacturer	MINIBREW #ad

3. carvedexquisitely

#ad

Stainless Steel Ball Valve,Homebrew Valve Kit,1/2 Inch Weldless Bulkhead Suitable For Household Brewing Kettles 1/2" NPT to 1/2" barbed hose

#adcarvedexquisitely #ad - Working pressure: 1000psi, working temperature: -100 to +660 ℉. High temperature resistant silicone seal. Npt 1/2-inch weldless bulkhead, suitable for 7/8" kettle hole. 304 stainless steel material, high strength, corrosion resistance, good pressure resistance.1/2 inch stainless steel hose barb.

Brand

carvedexquisitely #ad

4. YUANJS

#ad

Homebrew Weldless Bulkhead,1/2" Stainless Steel Fitting for Kettle Keg

#adYUANJS #ad - Excellent quality Made of high quality stainless steel, sturdy and durable to use. Product specifications 1/2" male npt threads and 1/2" NPT locknut. Easy and simple to handit is easy to add a valve, thermometer, or other accessory to your brew kettle or cooler. Easy to installNo welding required, easy to install. Environment-freindlyAll finishes are non-toxic, safe and Eco-friendly.

Brand	YUANJS #ad
Manufacturer	YUANJS #ad
Height	1.57 Inches
Length	2.17 Inches
Width	1.57 Inches
Part Number	YUANJSoyx1abipg8

5. Horiznext

#ad

Horiznext Stainless Steel npt 1/2 Weldless Bulkhead Fitting for Beer Wine brewing kettle

#adHoriznext #ad - Easily installed on your home brew kettle setup. Silicon rings are heat-resistant. Easily connected to 1/2 NPT Ball Valve, Thermometer, etc. Life span of 60 years. Made of stainless steel 304, heavy duty, durable and corrosion resistance.

Brand	Horiznext #ad
Part Number	879564158

6. CRBrewBeer

#ad

Beer Kettle BULKHEAD FITTING,homebrew hardware Compact Weldless Bulkhead,all in one

#adCRBrewBeer #ad - New 1/2"nps 50mm full thread nipple will work great with Kettles & Kegs! You can add a 1/2" npt thermometer, ball valve or other part to add to your kettle or sanke keg Inside or outside. Requires a 1″ 22mm hole to be drilled in the vessel for installation. Check our store for other items. All stainless construction, High Temperature Food Grade Silicone O-rings.

Brand

CRBrewBeer #ad

7. TSTabc

#ad

Homebrew Sanitary Weldless Bulkehad,1.5" TC Bulkhead Compression Fitting,1.5"Triclamp for Homebrew Kettle Bulkhead

#adTSTabc #ad - Weldless design ideal for FTSs and Brew Bucket flat lid pressurized transfers. The front of the flange does not have flats for a wrench. Once tight, you can insert a long rod or screw driver into the hole of the wingnut. 304 stainless construction and High heat compatible silicone gaskets. Add a 1. 5" tc flange to virtually any vessel!Just drill a 41MM hole and tighen the locknut with 1pcs extra Food grade gasket. Works on kettle as small as 12" in diameter. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp.

Brand

TSTabc #ad

8. TOPINCN

#ad

TOPINCN 1/2" Weldless Bulkhead Fitting Stainless Steel Sturdy Durable for Kettle Keg Hardware Accessories

#adTOPINCN #ad - All finishes are, safe and. Application: it is easy to add a valve, thermometer, or other accessory to your brew kettle or cooler. Application: 1/2" male npt threads and 1/2" NPT locknut. Material: made of high quality stainless steel, sturdy and durable to use. Installation: No welding required, easy to install.

Brand	TOPINCN #ad
Manufacturer	TOPINCN #ad
Height	0.39 Inches
Length	0.39 Inches
Width	0.39 Inches
Part Number	TOPINCNgokzn83yvx

9. Kuuleyn

#ad

Bulkhead Fitting for Keg Stainless Steel,1/2" Stainless Steel Homebrew Weldless Bulkhead Fitting for Kettle Keg

#adKuuleyn #ad - Bulkhead fitting for keg is 1/2" Male NPT threads and 1/2" NPT locknut. Weldless bulkhead is made of high quality stainless steel, sturdy and durable to use. Bulkhead fitting for kettle is no welding required, easy to install. Weldless bulkhead is easy to add a valve, thermometer, or other accessory to your brew kettle or cooler. Stainless steel bulkhead's all finishes are non-toxic, safe and Eco-friendly.

Brand	Kuuleyn #ad
Manufacturer	Kuuleyn #ad
Height	1.57 Inches
Length	2.17 Inches
Weight	0.28 Pounds
Width	1.57 Inches
Part Number	Nivvitywtp4q71yuo

10. DyAn

#ad

Weldless Bulkhead,1/2" Stainless Steel Homebrew Weldless Bulkhead Fitting for Kettle Keg

#adDyAn #ad - Made of high quality stainless steel, sturdy and durable to use. 1/2" male npt threads and 1/2" NPT locknut. All finishes are non-toxic, safe and Eco-friendly. No welding required, easy to install. It is easy to add a valve, thermometer, or other accessory to your brew kettle or cooler.

Brand	DyAn #ad
Manufacturer	DyAn #ad
Height	1.57 Inches
Length	2.17 Inches
Weight	0.29 Pounds
Width	1.57 Inches
Part Number	DyAnh2g3euyxmt