Top 10 Zing Canister Bag and Filter Accessory Kit, Model 2242 – Replacement Canister Vacuum Bags

As an Amazon Associate I earn from qualifying purchases.

1. Bissell

#ad

Bissell 2242 Replacement Filters for Zing Bagged Canister

#ad
Bissell #ad - Premium allergen filtration. Part number 2242. Part. Recommended to check your filters monthly and replace every 3 months or as needed. Works with the 2154 series of Bissell zing bagged products. Refer to your owner's manual for replacement instructions. Refer to your owner's manual for replacement instructions. Easy replacement. Replace your bag when it is fully check your bag before vacuuming. This is a Bissell replacement part. This is an i. E.
BrandBissell #ad
ManufacturerBISSELL HOMECARE INC. #ad
Height8.25 Inches
Length2.75 Inches
Weight0.5 Pounds
Width6 Inches
Part Number2242
Model2242

2. Bissell

#ad

New OEM Part, Bissell 5 Bag & Filter Kit for 4122 Zing Bagged Canister, Brown, 1480, 8 Ounces

#ad
Bissell #ad - It is best to check the dirt level in the bag before each use. A dirty or worn filter can diminish the cleaning performance of your vacuum. Includes 5 replacement bags, 1 Pre-Motor Filter and 1 Post-Motor Filter. Accessory kit for the bISSELL Zing Canister 4122.
BrandBissell #ad
ManufacturerBISSELL HOMECARE INC. #ad
Height10 inches
Length2.79 inches
Weight0.5 Pounds
Width6.04 inches
Part Number1480
Model1480

3. Nordun

#ad

Compare to Part 1613056 2 Pack, 1665W Zing Canister Vacuum, 1665, Replacement Filter for Bissell 2156A, 16652, Replacement Upright Vacuum Filter Compatible with Bissell Powerforce 1665

#ad
Nordun #ad - Washablethis replacement hepa filter can be washable. Note: turn off and unplug the vacuum before install. Take out the old filter and then place the new filter back into the bin. Warm tipsthe dirty filters will reduce suction; Depending on the frequency of vacuuming and the amount of dirt being cleaned, you need to change the filter replacements at least every 3 to 6 months for better performance.

Suggest rinsing the filter once every month, air-dry the filter completely for at least 24 hours. High qualitymade from quality material to keep you vacuum safe and in working condition all the time. Easy to assemblethis filter is inside the dirt tank.

Remove the dirt bin by firmly grasping it and pulling it out, to empty the dirt bin, find the release latch and pull it to open and empty. Compatible with replacement filter parts are compatible with bissell zing bagless canister vacuum cleaner filter models 2156A, 1665, 16652, 1665W series; The replacement part number is #1613056 and please check the model before purchase.
BrandNordun #ad
ManufacturerNordun #ad
Part Number1613056

4. LANMU

#ad

LANMU Replacement Dust Bags Compatible with Bissell Zing 4122 Series, Compare to Part Number 2138425 6 Pack, 2154W Canister Vacuum, 2154A

#ad
LANMU #ad - It designed with a sturdy cardboard mount with a self-sealing ring to make replacing the bag easy. Compatible with bissell zing canister models 4122, 2154c, 1668c, 1668w, 1668, 2154a, 4122d, 2154w, 1608 and PowerForce vacuum cleaners.

Replace part No. Regularly replace dust bag to ensure optimum performance. It is recommended that change your zing bag when it is 1/2 to 2/3 full. Open the dust bag chamber, remove the bag by grabbing the dust bag collar and pulling out. Please note this bag are not compatible with 22Q3. Package included 6 pack canister filter bags. 2138425. Install the new dust bag in place.
BrandLANMU #ad
ManufacturerLanmu Direct #ad
Height10.24 Inches
Length11.42 Inches
Weight208.2 Grams
Width1.18 Inches
Part NumberK0361
ModelK0361

5. EnviroCare

#ad

50557 and 50558 Panasonic Type C-5,15 pack, Envirocare Replacement Vacuum Cleaner Bags made to fit Kenmore Canister Type C/Q. 5055

#ad
EnviroCare #ad - 99. 7% filtration. EnviroClosure sealing system. Designed to fit designed to fit kenmore type c 5055, 50557 and 50558 and Panasonic Type C-5 Canister Vacuum Cleaners. Manufactured by enviroCare Technologies, the leader in premium aftermarket Vacuum bags and Filters. 15 premium micro Filtration Vacuum Bags. Micro filtration.
BrandEnviroCare #ad
ManufacturerEnviroCare #ad
Height2 Inches
Length13 Inches
Width10 Inches
Part Number137-15
ModelSYNCHKG108619

6. KEEPOW

#ad

Replacement Bags Compare to Part Number 2138425, KEEPOW 12 PCS Dust Bags Compatible with Bissell Zing Canister Models

#ad
KEEPOW #ad - The internal one is to let the air pass through and keep out the dust, the bag is able to filter dust very well without reducing the vacuum’s suction. Just simply unplug your machine, open the chamber, than press your new bag into the connector tube and tusk it into the chamber, grab the collar of your old dust bag and pull it out, and your vacuum is all set.

Package includes: 12 pcs dust bags + 1 PCS tiny brush. It consists of two layers. 2138425. Good quality: the vacuum dust bag is sturdy and durable, while the external layer is beneficial to integral strength. Compatible with bissell zing canister models 1608 1668, 4122d, 2154c, 4122, 2154W, 1668C, 2154A, 1668W, and PowerForce vacuum cleaners. With these specially treated double layers, with a high efficiency of filtering dust.

Fit model: these dust bags are the replacement for part no. Easy to install: at the interface between the zing bag and the vacuum cleaner is a design of cardboard mount and rubber O-ring sealing, which is bound to make your installation process much more easier. Notes: we recommend you to change the dust bag when it’s 1/2 or 2/3 full, or it looks very bulging from the outside, to maintain adequate suction and keep your vacuum working efficiently.
BrandKEEPOW #ad
ManufacturerKEEPOW #ad

7. Bissell

#ad

213-8425, Bissell Dust Bag 3-pack for Zing 4122 Series # 2138425

#ad
Bissell #ad - Three individual bags. If you have zing vacuum model 22Q3, you will need a different bag. Fits zing vacuum model 4122.
BrandBissell #ad
ManufacturerBissell #ad
Height11.77 Inches
Length11.02 Inches
Weight0.25 Pounds
Width1.18 Inches
Part Number1608
Model1608

8. Green Label

#ad

Green Label Brand Replacement Filter 1613056 for Bissell 2156A Zing Bagless Canister Vacuum Cleaners

#ad
Green Label #ad - Package contains: 1 x HEPA Filter. Replaces bissell OEM #1613056. Fits: 2156a zing bagless, 2156e AeroSwift Compact Canister Vacuum Cleaners. No questions asked return policy. Filter dimensions: 4. 25” x 4. 25” 2. 625”. Fully refundable. Customer support. High quality.
BrandGreen Label #ad
ManufacturerGreen Label #ad
Height4.25 Inches
Length4.25 Inches
Width4.25 Inches
Part NumberGL-F-BIS2156-1

9. Casa Vacuums

#ad

& AC37KAKTZ00, UC487321, UC48731-12, Kenmore Compatible HEPA Bag + Filter Kit. 6 Style Q/C 20-53292 5055 50557 50558 for Canister Vacuums. Plus 1 CF-1 CF1 Pre-Motor Filter 86883 81002

#ad
Casa Vacuums #ad - Kenmore cf1 pre-motor filter part #'s 86883, 631396, 50104, 50557, 53292, 81002, 53291, 5055, 20-50104, 50558, 20-53290, and AC37KAKTZ000. Designed to fit canister models 21814, 26450, 28015, 27614, 81615, 24325, 81414, 27515, 26413, 27615, 27814, 24327, 24410, 81714, 25430, 24971, 2621, 23350, 26430, 24321, 26395, 26435, 24326, 24981, 24991, 26325, 23040, 27514, 26355, 27914, 27915, 26410, 24350, 26312, 81214, 29319, 24320, 26390, 23243, 26320, 26455, 81614, 28014, 24975, 27815, 24390, and BC4002 Canister models.

66 style q/c premium hepa filtration canister Vacuum Cleaner Bags. Also fits the hepa cloth kenmore style q bags. Also fits panasonic canister models; mc-cg902, mc-cg973, mc-v9600, mc-cg800, and mC-885 Series Canisters taking the MC-150M or AMC-J3EP bags.

Fits kenmore canisters made in the last 20 years including whispertone, Elite, Intuition, 400 Series, 200 Series, 600 Series and Progressive; Also will fit Panasonic C-5. Plus 1 cf-1 Filter. Replaces part numbers; 20-53292, uc487321, 53290, 20-53291, uc48731-12, 54321, 20-54321, km48751-12.
BrandCasa Vacuums #ad
ManufacturerKenmore #ad
Height1.5 Inches
Length16 Inches
Width10 Inches
Part Number5055 Q 53292 C 50557 50104 81002
ModelMost Kenmore Canister Vacuum Cleaners
Warranty30 Day Returns

10. Membrane Solutions

#ad

Wrench,1/4" Quick-Connect Fittings,Check Valve, Replacement for Under Sink Home Drinking RO Water Filter System, Membrane Solutions 100 GPD RO Membrane, Reverse Osmosis Membrane with Membrane Housing

#ad
Membrane Solutions #ad - You just need to open the faucet of the RO purifier using this RO membrane, you can get drinking water. Every time the temperature drops by 1°c / 33. 8°f, at a temperature of 10°c / 50°f or a pressure of 50 psi, 25°C / 77 °F, the GPD Rating drops by about 1 - 1.

5%. Make your own reverse osmosis water filter right now! You don't need to buy an expensive all-in-one solution. High contaminant rejection remove up to 97% of total dissolved solids from water. Universal comabout ro gpd ratings gpd ratings are based on tests performed under specific water conditions urban tap water, 100 psi. For example, the gpd rating drops by about 3-4%; every time the pressure drops by 1 PSI, a standard 100 GPD RO membrane, the GPD Rating is about 50.

Patible. Tips recommend work pressure is 100 psi when using this product in a maple syrup reverse osmosis system. So these ro membranes can easily remove heavy metal, harmful minerals and other soluble salts from water. 8 glasses of 8oz cups of water are recommended 1 gallon. You can get a gallon of water in about 15 minutes. 100 gallon per day membrane solutions high-quality reverse osmosis membrane can produce 100 gallons purified water per day 4. 1 gallons / 15.
BrandMembrane Solutions #ad
ManufacturerMembrane Solutions #ad
Height3 Inches
Length12.87 Inches
Weight0.9 Pounds
Width5.34 Inches
ModelROSL1812-100G
WarrantyWe provide worry-free service and water purification solutions, welcome to disturb us!